VenuSun Silver Frame 410W Monocrystalline Solar Panel 210mm PERC 80 Cells
Dimension (L × W × T): 1775 × 1098 × 28mm
Maximum system voltage: 1500V 20A
Packing: 39pcs/pallet, 1014pcs/40"HQ
1. New layout design, the overall layout is compact and uniform, perfect size and weight, saving installation space and transportation cost.
2. Full series small current circuit design, perfectly adapted to mainstream inverters.
3. The most advanced 210mm large size battery and PERC+SE technology, higher conversion efficiency and saving installation cost.
4. MBB+Half-Cut technology for more reliable performance and effective reduction of power mismatch caused by shadow shading.
5. Highly automated production equipment, mature and stable production technology, 25 years quality assurance.
6. Sufficient cable length up to 70cm to ensure horizontal and vertical installation without additional extension cables.
1. The full series circuit design avoids the use of a waist line in the middle of the PV module, giving it a uniform layout. The 3.2mm thick tempered glass on the front side effectively enhances the module's resistance to wind, snow and hail. The encapsulated EVA is made of China's first-tier brand, with high weight, UV resistance, PID resistance, high adhesion, and high weather resistance, making the PV modules have a longer service life. 210*105mm solar cell welding size and 5*16Pcs arrangement make the modules reasonable in size and lighter in weight, making them easier to transport and install, saving the cost of each link of the PV power plant.
2. The silver aluminum alloy frame is anodized with an oxide film thickness of over 14 microns and hardness of over 12HW, which effectively improves the structural stability and mechanical bearing capacity of the solar panel. The three-stage plastic-filled junction box has passed the TUV 1500V voltage insulation test to adapt to more complex installation environments, and the IP68 protection level has a safer use guarantee.
3. Using monocrystalline silicon multi-gate large size 210mm cells, each cell has undergone strict testing and color sorting to avoid the problem of color difference of solar panels and to ensure that the cell color of each PV module is consistent.
The application of mainstream cell technologies such as MBB half-cell PERC+SE makes the module's conversion efficiency over 21%, allowing more power to be installed on the same area of the roof. It has perfect low light performance, with power output under low light conditions. 25 years product performance guarantee, 10 years power generation ≥ 92%, 20 years power generation ≥ 82%.
4. New packaging design. Adopt 37PCS an outer box vertical packaging, more reasonable, not only reduce the packaging cost, but also save the transportation cost, increase the safety and firmness of transportation. Paper corner protectors are used between the parts to avoid collision and friction between the frames. The inside of the package is fixed with 5 plastic steel straps and the outside is fixed with 7 plastic steel straps to ensure that the parts will not be damaged in long-distance sea and land transportation. The outer box can also be customized according to customers' requirements, so that customers have more choices.
5. The following is the data sheet of VenuSun silver frame PV panels produced by our company
Click the icon below to get a quote